Description
Temperature transmitter for 2 temperature sensors, intended for PLC series FBs or B1/B1z.
Properties
• Easy solution for measuring two temperatures of the PLC FATEK * 3)
• For the temperature sensor type PKTY81/210, Pt100 or Pt1000 * 1)
• Error Report - Evaluation of state at short-circuit or tear off the sensor
• For PLC inputs connected as "SINK" (terminal DC connected to +24 V)
• Ability to connect multiple transmitters to one basic PLC unit (max. 4) * 2)
* 1) CONV transducers are produced for a specific type of temperature sensor (KTY81/210, Pt100 or Pt1000) see table variants. With another type of connected sensors do not give the correct value.
* 2) Each transmitter requires to connect two separate inputs X to the PLC. The requirement is that each PLC input was used for the frequency of at least 1 kHz. This restriction applies especially B1z series PLC, which can be connected to only one converter CONV. From a mechanical point of view it is preferable to choose to connect to other inputs (X2, ..) PLC series FBs converter type B1, and connect it with wires to a maximum length of 1 meter.
* 3) The transmitters are available in two versions, which differ only in mechanical design.
Type FBs: | Is intended to be mounted directly to the input terminals X0, X1 and power supply PLC series FBs. |
Type B1: |
Is intended to be mounted directly to the input terminals X0, X1 and power supply PLC series B1/B1z. This type is suitable for connection to other inputs (X2, ...) of the both types of PLC (FBs and B1/B1z too) via wires (length up to 1 m) |
Technical Data
Power Supply: |
24VDC (directly from PLC) |
Temperature Sensor: |
KTY81/210, Pt100, Pt1000 (by transmitter type) |
Temperature Range of Sensors: |
-100 To +300 ° C (for sensors Pt100 and Pt1000) -50 To +150 ° C (for sensors KTY81/210) (sensor GSM-C-T2 has a temperature range of -20 ° C to +50 ° C) |
Dimensions for Series FBs: |
40.5 x 30.2 x 18 mm |
Dimensions for Series B1/B1z: | 32.5 x 30.2 x 18 mm |
Type: | painted over PCB |
Mounting: | Directly to the input terminals X0, X1 PLC |
Recommended Accessories
- Temperature sensor series GSM-C-T2 type KTY81/210
GSM-C-T2 (-20 ° C to +50 ° C; cable length 1 m)
GSM-C T2.5 (-20 ° C to +50 ° C; cable length 5 m)
GSM-C-T2.10 (-20 ° C to +50 ° C; cable length 10 m)
GSM-C-T1 (-50 ° C to +150 ° C Lead length 15 cm with connector)
- Temperature sensor type Pt1000
GSM-C-T3 (-50 ° C to +250 ° C Lead length 2 m - max +180 ° C)
Variants
Stock Number |
For PLC Series |
Temperature Inputs |
FAC-FBS-CONV-KTY |
FBs-MA, MC |
2x for KTY81/210 |
FAC-B1-CONV-KTY | B1/B1z | 2x for KTY81/210 |
FAC-FBS-CONV-PT100 |
FBs-MA, MC |
2x for Pt100 |
FAC-B1-CONV-PT100 | B1/B1z | 2x for Pt100 |
FAC-FBS-CONV-PT1000 | FBs-MA, MC |
2x for Pt1000 |
FAC-B1-CONV-PT1000 | B1/B1z | 2x for Pt1000 |