Description

Temperature transmitter for 2 temperature sensors, intended for PLC series FBs or B1/B1z.

Properties

• Easy solution for measuring two temperatures of the PLC FATEK * 3)
• For the temperature sensor type PKTY81/210, Pt100 or Pt1000 * 1)
• Error Report - Evaluation of state at short-circuit or tear off the sensor
• For PLC inputs connected as "SINK" (terminal DC connected to +24 V)
• Ability to connect multiple transmitters to one basic PLC unit (max. 4) * 2)

* 1) CONV transducers are produced for a specific type of temperature sensor (KTY81/210, Pt100 or Pt1000) see table variants. With another type of connected sensors do not give the correct value.

* 2) Each transmitter requires to connect two separate inputs X to the PLC. The requirement is that each PLC input was used for the frequency of at least 1 kHz. This restriction applies especially B1z series PLC, which can be connected to only one converter CONV. From a mechanical point of view it is preferable to choose to connect to other inputs (X2, ..) PLC series FBs converter type B1, and connect it with wires to a maximum length of 1 meter.

* 3) The transmitters are available in two versions, which differ only in mechanical design.

Technical Data

Recommended Accessories

• Temperature sensor series GSM-C-T2 type KTY81/210

              GSM-C-T2 (-20 ° C to +50 ° C; cable length 1 m)
              GSM-C T2.5 (-20 ° C to +50 ° C; cable length 5 m)
              GSM-C-T2.10 (-20 ° C to +50 ° C; cable length 10 m)
              GSM-C-T1 (-50 ° C to +150 ° C Lead length 15 cm with connector)

• Temperature sensor type Pt1000

              GSM-C-T3 (-50 ° C to +250 ° C Lead length 2 m - max +180 ° C)

Variants