(1DIn, 1DOut, power 8-30V)
Discontinued product, for archive purposes only.
Description
GSM R2 T (GSM RELAY for short) is based on GSM-RELE2-TERM device with one analog input added. GSM RELAY is designed to remotely control one circuit of home electrical network via GSM network. E.g. GSM RELAY can control home electrical heating system via SMS or entry gate by “ringing” from mobile phone. Analog input are designed for connection of temperature sensors and can be used in “temperature regulation” function of GSM RELAY which can control connected heating system to maintain the preset temperature. The temperature can be readout via SMS.
Temperature sensor is not part of delivery and has to be ordered separately.
Technical Data
Power supply: | 8VDC/12VAC to 30 VDC/AC (typically 12 VDC) |
Max consumption: | 3,3W (discharged battery, active GSM, active output) |
Standby consumption: | 12Vss/30mA (connect GSM) |
Logical inputs: | 1 |
Logical outputs: | 1 |
Temperature inputs: | 1 (for temperature sensor GSM-C-T2) |
Other parameters: | see support |
Use of GSM RELAY
- Houses, bungalows – remote control of heating, water heating, air conditioning, gate opening
- Event reporting – opening of doors, windows, alarm
- State reading - the temperature of two sensors and contact state (e.g. from security circuits)
Advantages
- Low Price
- Easy control
- internal Li-ION accumulator
Package content
- 1 pc Joint Antenna without cable
- 1 pc 2 pin connector (diametter 3,5mm)
- 1 pc 8 pin connector (diametter 3,5mm)
- printed documentation
Remote control from your mobile phone - preliminary
Recommended Accessories
Temperature sensor is not part of delivery and has to be ordered separately.
-
Temperature sensor GSM-C-T2, GSM-C-T2.5 or GSM-C-T2.10
- Power Adaptor 230 VAC/12 VDC
- To boost output: Relay in DIN mounting socket (coil 12 VDC 2x8A sw. cont.)
- To boost input: Relay in DIN mounting socket (coil 230 VAC 2x8A sw. cont.)
- DIN rail holder